DPT File No. DC-551:  32’ Cutterhead Ladder – AMMCO cutterhead ladder, 32 ft long, structure only (no cutterhead).  Has 10” suction pipe.  Fair condition, serviceable.  Located at DMC.  $1,500.

 

DPT File No. DC-552:  Dredge Winch – 3-drum winch with mechanical clutches and brakes.  Has electric motor drive, but could also be powered with hydraulic motor.  Suitable for 8” through 12” cutterhead dredge.  Very good condition.  Located at DMC.  $4,500.

 

DPT File No. DC-553:  53’ Spuds – A pair of 24-in x 53-ft long spuds, in very good condition.  ½“ wall thickness, with pin holes for 3” pins.  Located at DMC.  $3,500 buys both.

 

DPT File No. DC-555:  16” Elbow – 16-inch, long radius, cast alloy steel elbow.  New condition.  Located at DMC.  $1,500.

 

DPT File No. DC-556:  18” Elbow – 18-inch, long radius, cast alloy steel elbows.  Good condition; two available.  Located at DMC.  $1,000 each.

 

DPT File No. DC-557:  Hy-Vo Chain Sprocket – 28-tooth, 7¼” wide.  Good condition, $500.  Located at DMC.

 

DPT File No. DC-559:  3-Drum Winch – Victoria Machine Works 3-drum winch, with Wichita air clutches.  Complete with hydraulic motor, and includes an inventory of air clutch parts.  Excellent condition.  Texas Gulf Coast; $12,500.

 

DPT File No. DC-560:  2-Drum Swing Winch – Extra heavy-duty 2-drum swing winch, manufactured by DMI; 45,000-lb single line pull.  Has heavy, large-diameter, cast steel drums, hydraulic motor drive, and Airflex clutches.  Unused.  Located in Kansas.  $50,000.

 

DPT File No. DC-561:  Ellicott Dredge Hull – Refurbished Ellicott Series 1000 hull, includes main hull center section, two hull side pontoons, and A-frame.  Ladder is not included.  This hull is suitable for 16”, 18”, or 20” dredging machinery.  West Coast location.  Price is reduced.

 

DPT File No. DC-562:  Swintek Ladder – Eagle Iron Works Swintek chain ladder, 30-ft long, with 10-in suction.  Includes Eagle Model BM-D 14504 drive gear with hydraulic motor drive, 8” pitch chain (needs new chain).  Nebraska.  The $20,000 asking price includes an inventory of new wear parts.

 

DPT File No. DC-563:  Ellicott Bucket Wheel Cutter – Ellicott Dragon Wheel Model WE87 bucket wheel cutter system.  87 in diameter, eight buckets, 100-hp hydraulic drive.  Speed range: 9-16.6 rpm; cutting force: 10,400 lb.  Fair condition.  Located at DMC.  $25,000.

 

DPT File No. DC-565:  Falk Reduction Gear – Model 2080Y1-S dredge pump drive reduction gear.  1.7 : 1 reduction ratio; 1775 rpm in, 1044 rpm out; rated 450-hp; 2.04 : 1 service factor.  Excellent condition.  Located at DMC.  $3,500.

 

DPT File No. DC-570:  2-Drum Braden Winch – Model MS10 with single center drive, jaw clutches.  Came off Dixie Dredge, good condition.  Located at DMC.  $1,500.

 

DPT File No. DC-571:  Tulsa Worm Gear Winch – 10-ton winch, good condition.  Located at DMC.  $750.

 

DPT File No. DC-573:  8” Pump Shell – Rebuilt Ellicott pump shell, 8” discharge, casting no. 20193.  Unused since rebuild.  Located at DMC.  $1,500.

 

 

 

 

 

 

 

 

 

 

 

Page 12

Misc Dredge Components: DC551—DC573