Text Box: BOATS & BARGES Text Box: - BOATS - DPT File No. BT-912: NEW 20' Push Boat/Tender – Brand new 20' x 8' push boat/dredge tender, with push knees, A-frame, and manual winch. Includes outboard motor mount and all necessary cables and connections, with 115-hp to 150-hp outboard motor. Enclosed cab with hydraulic steering. Hull has three watertight compartments, one for 550 gallon fuel storage. Usually available within 4-6 weeks ARO. One currently in stock and immediately available at $45,000. DPT File No. BT-913: NEW 20' Twin-Engine Push Boat/Tender – Brand new 20' x 8' push boat/dredge tender, with push knees, A-frame, and manual winch. Powered by twin 4-stroke outboard motors on aft mount. Enclosed cab with hydraulic steering. Hull has three watertight compartments, one for 550 gallon fuel storage. Available for delivery within 4-6 weeks ARO. Lists at $59,950. DPT File No. BT-914: Rebuilt 51' Dredge Tender/Work Boat – This twin screw dredge tender/work boat is currently being rebuilt in Florida. The V-form hull, with push knees, has been completely refurbished, sandblasted, primed, and painted; dimensions are 51' long x 12' beam x 5' molded depth. Twin Caterpillar 3208-TA marine diesel engines are being installed (750-hp combined rating), with rebuilt Twin Disc marine transmissions, new drive shafts, tubes, bearings, and screws. The brand new control cabin is air conditioned, heated, insulated, and soundproofed. Equipped with new A-frame, new hydraulic winch, and new hydraulic system. Four liquids storage tanks total 1050 gallons capacity. Delivery to be determined upon inquiry; asking $149,500. - BARGES - DPT File No. BG-954: NEW 20-ft Deck Barges – 20’x 8’x 4’ steel deck barges provide sturdy, convenient, all-purpose flotation units at an affordable cost. 10-ton cargo capacity at 67% submersion. Available as individual or sectional units. Built at time of order; basic spec can be modified as needed. Single unit delivery is usually available within 30 days. Call DMC for current quote. DPT File No. BG-958: NEW 28-ft Dredge Tender Barge – Flat deck dredge tender barge, raked bow, 28’x 10’x 2’6”. Fitted for outboard motor, with control stand. Includes jib structure at bow with manual winch. Will modify to suit; typically available within 30 days of order. Built new at DMC; $35,500 as listed. Text Box: Link to Dredge & Marine Corp. Home Page