Dredge & Pit Trader page 4 - Dredges, cont'd

DPT File No. UD-293: LWT Electric Powered Lagoon Pumper – Model RCLPEM, remote-controlled, highly-portable horizontal auger dredge, built by LWT, and equipped with 4x4x14 pump with 75-hp main electric power (460-volt, 3-phase). Complete with 1000' of power cable on reels, and a few spare parts. Very good condition, immediately available in Nebraska. Reduced - Price Group A.

DPT File No. UD-295: IMS Model 5012-HP Auger Dredge – Very nice standard model horizontal auger dredge from IMS, manufactured in 2005, with only 1200 hours use. The HP (high pressure) model features an 8x10 GIW pump, powered by a 325-hp John Deere diesel engine. Starwheel Drive propulsion is standard, and cable drive is also included with this machine. Reported to be in excellent condition, immediately available near Daytona Beach, FL. Price Group C.

DPT File No. UD-300: 12" DMC-Refurbished Dredge – This dredge was originally built by Assemblers, and is now at the DMC workshop for refurbishing/re-outfitting. It is equipped with a 12x12-36 dredge pump, with primary plant specifications to be determined. We can install power, winches, ladder, cutter system, etc. of customer's choice. Typically, we would install a low-time Cat 3412, rebuilt winches, etc. The hull is a one-piece configuration, measuring 50' x 15' x 4'. Delivery 3-4 months ARO. Price Group D.

DPT File No. UD-306: 14" Ellicott Dredge – Ellicott's Series 600 is designed to provide high productivity with optimal portability. This dredge was rebuilt in 1998 for an aggregate producer; then, in 2002, it received a new 16x14 Marathon pump, new 940-hp Cummins diesel, new cutterhead and drive, new Pullmaster winches, etc., etc. Overall 3-pc hull dimensions are 50' x 22' x 4'6". Working depth is 32 ft. All new cutterhead, shaft, and bearings were installed in 2006, as well as complete hydraulic system refurb. Immediately available and ready to work in Florida; Price Group F.

DPT File No. UD-307: New 10" DMC Model HPC-250 – DMC's MSP Sandpiper Series is designed for optimal portability in a standard-duty dredging machine. The one-piece hull eliminates most of the labor usually associated with portable dredge mob/demob activities. The primary plant includes a 12x10 GIW LSA 30 heavy duty dredge pump, powered by a 360-hp (continuous) Cat 3406 diesel engine. Hull dimensions are 35' x 14' x 4', with 28' ladder assembly. Call DMC for consultation and further details. Located at DMC; 2-3 mo’s ARO. Price Group E.

DPT File No. UD-310: 10-cu.yd. SMI Floating Clamshell Dredge – This excellent machine was built new in 1995 for an aggregate producer in Pennsylvania, refurbished and moved to Florida in 2000. The 10-cu.yd. electro-hydraulic bucket is operated via a PS Forder hoist, capable of digging to depths of 200 ft. The pontoon configuration is 94' long x 43' wide x 6' deep, and supports a processing plant that includes dewatering system, fine sand recovery system, 16x54 jaw crusher, hydraulic hammer, grizzly and oversize chute, etc. The package includes a 600' floating conveyor system. The entire operation is controlled from a spacious, air-conditioned operator's cabin, and features state-of-the-art PLC automation controls. Call DMC for complete details. Currently located in south Florida, and nicely priced in Group J.

DPT File No. UD-314: 6" Ellicott Electric-Powered Bucket-Wheel Dredge – This small electric dredge boasts a 400-hp motor powering the 6x6-30" dredge pump. The bucket wheel, bucket wheel rim, and hopper assembly are all new. The hull measures 64' x 12'. Equipped with kicker spud and hydraulic-ram-controlled ladder. Dredging depth is 17'. This low-hour dredge is reported to be in "great condition," ready to work. It has just been refurbished, including sandblasting and painting. Located in Utah; Price Group C.