Dredge & Pit Trader page 5 - Dredges, cont'd

DPT File No. UD-290: 8" National Cutterhead Dredge – Designed for ultimate portability, this machine is equipped with running gear, so that it can be transported without a trailer via the 5^th wheel and gooseneck included. Primary plant includes an 8x10-28 Lightning pump, with International Harvester diesel power. The 28' cutterhead ladder is raised and lowered via heavy-duty hydraulic cylinders. Reported to be in operating condition, although the pump shell is cracked. Now scheduled for major refurbishment at DMC. Immediately available as-is, Price Group A; or, after refurbishment, Group B. Buyer can specify modifications at a price to be determined.

DPT File No. UD-291: 10" IMS Model 4010 Auger Dredges – This listing consists of two (2) IMS 4010 standard model horizontal-auger dredges, both reported to be in good working order, both manufactured in the late 1980's. Several thousand feet ft of 10" HDPE discharge pipe, with Gheen fittings, included in the package price. These machines have just been de-commissioned, and are immediately available in Louisiana. Owner will sell dredges separately, at a price to be negotiated. Contact DMC for additional information. The asking price for both machines, together, including spares, has just been reduced: Price Group B.

DPT File No. UD-293: LWT Electric Powered Lagoon Pumpers – Model RCLPEM, remote-controlled, highly-portable horizontal auger dredge, built by LWT, and equipped with 4x4x14 pump with 75-hp main electric power (460-volt, 3-phase). Two available, each complete with 1500' of power cable on reels, 8'x8' operations building, and spare parts. Both are in very good condition, immediately available in Nebraska. Each dredge, including the complete set-up, Price Group A.

DPT File No. UD-294: 8" W&S Dredge – A standard late-model 8-inch machine from one of the respected leaders in small dredge manufacturing. This machine is equipped with a 10x8 dredge pump, powered by a Caterpillar model 3406 diesel engine. Maximum operating depth is approximately 15 feet. The 5-piece dismountable hull consists of a 40'x10' center section, with two 12'-long x 4'-OD side pontoons on each side (four pontoons total). This package includes 5000 ft of 8" HDPE discharge pipe, in addition to a 3-axle drop-deck trailer which transports the dredge in a single load. Machine is reported to be in very good condition, ready to go to work. Immediately available in Michigan; Price Group B.

DPT File No. UD-295: IMS Model 5012-HP Auger Dredge – Very nice standard model horizontal auger dredge from IMS, manufactured in 2005, with only 1200 hours use. The HP (high pressure) model features an 8x10 GIW pump, powered by a 325-hp John Deere diesel engine. Starwheel Drive propulsion is standard, and cable drive is also included with this machine. Price includes 250' of IMS roll-flat pipe. Up to 2500' of 10" HDPE discharge pipe also available from this owner, as well as a Mack tractor, trailer, and all-terrain loader. All in excellent condition, immediately available in the St. Louis area. Price Group C.

DPT File No. UD-296: IMS Model 5012-LP Auger Dredge – This IMS standard model horizontal auger dredge was manufactured in 2004, and has only 2000 hours actual use. The LP (low pressure) model is equipped with a 12" IMS pump with 6"-diameter sphere passage. Power is provided by a 325-hp John Deere diesel engine. This machine features Starwheel Drive propulsion, and cable drive is also included. Price includes 250' of IMS roll-flat pipe. 2500' of 12" HDPE pipe also available from this owner, as well as a Mack tractor, trailer, and all-terrain loader, all at extra charge to be negotiated. Reported to be in excellent condition, immediately available in the St. Louis area. Price Group C.

DPT File No. UD-299: IMS Model 4010 Auger Dredge – This standard model IMS dredge was built in 1989. Equipment includes a 10" pump with 177-hp Cummins power. Dimensions are 30' long x 9'4" wide; weight 12,000 lb. 10" HDPE pipe is also available. Owner reports machine to be in good condition mechanically; needs paint. Located in Indiana; Price Group A.