Dredge & Pit Trader page 7 - Dredges, cont'd

DPT File No. UD-306: 14" Ellicott Dredge – Ellicott's Series 600 is designed to provide high productivity with optimal portability. This dredge was rebuilt in 1998 for an aggregate producer; then, in 2002, it received a new 16x14 Marathon pump, new 940-hp Cummins diesel, new cutterhead and drive, new Pullmaster winches, etc., etc. Overall 3-pc hull dimensions are 50' x 22' x 4'6". Working depth is 32 ft. All new cutterhead, shaft, and bearings were installed in 2006, as well as complete hydraulic system refurb. Immediately available and ready to work in Florida; Price Group F.

DPT File No. UD-307: New 10" DMC Model HPC-250 – DMC's MSP Sandpiper Series is designed for optimal portability in a standard-duty dredging machine. The one-piece hull eliminates most of the labor usually associated with portable dredge mob/demob activities. The primary plant includes a 12x10 GIW LSA 30 heavy duty dredge pump, powered by a 360-hp (continuous) Cat 3406 diesel engine. Hull dimensions are 35' x 14' x 4', with 28' ladder assembly. Call DMC for consultation and further details. Located at DMC; Price Group E.

DPT File No. UD-308: 20" Modified AMMCO Dredge – This powerful machine was originally built in Nashville, Tennessee in 1965, and has benefited from exceptional maintenance throughout its history. Primary equipment features a 24x20 Mobile Pulley pump, powered by an EMD 645-E main diesel engine, with Cat 343 auxiliary. Overall hull dimensions are 105' x 30' x 6'6". The extra-heavy-duty ladder is 55' long, and supports a 375-hp cutter module. This dredge has just been removed from its last project, and remains in good working condition. Now located in Arkansas; Price Group G.

DPT File No. UD-309: 12" Cutter-Suction Dredge – Nicely equipped portable dredge measures 40' x 20' with 38' ladder, maximum digging depth 26'. Primary plant includes a heavy duty GIW 14x12 dredge pump and 650-hp GM 12V-71 diesel engine driving through a 3:1 Twin Disc gear. Dredge can be configured with spuds or stern winch, both included, as well as a choice of cutterheads. This complete package also includes a generator/welder, 1500' of steel and plastic pipeline with pipe fusion machine, a GMC flatbed truck, and a pontoon work boat/dredge tender. All in very good condition, cleaned up, and ready to go in south Florida. The entire spread is priced very reasonably; Price Group D.

DPT File No. UD-310: 10-cu.yd. SMI Floating Clamshell Dredge – This excellent machine was built new in 1995 for an aggregate producer in Pennsylvania, refurbished and moved to Florida in 2000. The 10-cu.yd. electro-hydraulic bucket is operated via a PS Forder hoist, capable of digging to depths of 200 ft. The pontoon configuration is 94' long x 43' wide x 6' deep, and supports a processing plant that includes dewatering system, fine sand recovery system, 16x54 jaw crusher, hydraulic hammer, grizzly and oversize chute, etc. The package includes a 600' floating conveyor system. The entire operation is controlled from a spacious, air-conditioned operator's cabin, and features state-of-the-art PLC automation controls. Call DMC for complete details. Currently located in south Florida, immediately available. Price Group J.