ImageDetailsPrice

10-inch & 8-inch HDPE Discharge Pipe - SPECIAL

This is a nice stock of 10" and 8” HDPE discharge pipe in two different wall thicknesses. - 10” SDR 17 pipe, 5/8" wall, 9.41" avg ID: approx. 6,000 ft available… more

 $5 - 7

12-inch HDPE Pipe - SPECIAL

This is a large lot of 12" HDPE discharge pipe in two different wall thicknesses. - SDR 17 pipe, 0.75" wall, 11.16" avg ID:  10,000 ft available at $9 per ft - SDR… more

 $9 - 10

14-inch Ellicott Dredge - SPECIAL

Ellicott's Series 600 is designed to provide high productivity with optimal portability.  This dredge was rebuilt in 1998 for an aggregate producer; then, in 2002, it received a new 16x14… more

 $600,000 - 700,000

14-inch Used Dixie CS-2-14 Dredge - SPECIAL

This Dixie Dredge Model CS-2-14 has been acquired for refurbishing and resale by DMC.  It is equipped with a 14” Series N-40 Thomas dredge pump, powered by a Detroit Diesel… more

 $500,000 - 600,000

16-inch CDW Dredge - SPECIAL

For Sale or Lease...  This outstanding, heavy-duty 16” dredge was manufactured by Custom Dredge Works of Topeka, Kansas in 2009, and has less than 5000 hours service since new.  The… more

 $1,500,000 - 1,700,000

6-inch VMI Cutterhead Dredge - SPECIAL

VMI’s Model MD-630CS is a conventional cutter-suction dredge, with standard rotating-basket cutterhead.  The 8” x 6” Morris high-chrome dredge pump is powered by a 225-hp Caterpillar 3306T diesel engine.  Maximum… more

 $150,000 - 200,000

8-inch GIW-Cummins Booster Pump - SPECIAL

Very low hour booster pump built by IMS, with 8x10-24" GIW pump and Cummins diesel power.  Complete booster station, all skid mounted, and only 1344 total hours.  Owner is motivated… more

 $50,000 - 60,000

8-inch Goulds-Cummins Booster Pump - SPECIAL

Barely used 8" booster pump, assembled by IMS.  177-hp Cummins diesel engine powers the 8x10-21" Goulds model 5500 pump, rated at 3,000 gpm.  Skid mounted and immediately available.  Owner reports… more

 $40,000 - 50,000